Page 7
Step #4: clamp power module assembly to worksurface and
mount power strip
• Insert the bottom bracket through the grommet hole.
• Attach the clamp to the bottom bracket.
— Fit the keyhole openings in the clamp over the M5x8 screw heads.
Tighten the screws securely over the narrow portion of the keyholes using the M4 Allen key.
• Clamp the assembly securely to the worksurface by tightening the triangle knob.
• Mount the power strip underneath the worksurface in the desired location
using the double-sided tape and four M4x14 wood screws.
— Note: The double-sided tape is only temporary and is not intended for permanent installation.
• Plug the power strip into the AC outlet and flip the switch on.
FlexCharge4CX Grommet mount
hook keyholes onto
screws and tighten
worksurface
grommet
hole
You are now ready to use the eight AC power outlets (six on the power strip, two on the power
module) as well as the USB-A and USB-C charging ports located on the power module.
