Quick Start Guide FELIX Pro 3
Page
13
8
Preparation for printing
The Basics
Below is the workflow described of 3D printing. With some pointers to ensure a successful print. This
manual only covers the last step in the process.
1.
Design
Follow the construction rules
of 3D printing.
-
Limit overhang angles
-
See software quickstart
manuals for more details
3. Print
Filament guided to extruder
with filament roll holder and
guiding tubes.
Filament not entangled on roll.
Use good quality filament
Ensure print surface is absolutely
free from grease.
Ensure nozzles of print-head are
clean
2. Slice
Choose correct settings
according to type of print
object and chosen material
type.
Use up to date software
Up to date slicing settings
Followed slicing
recommendations
First Layer
Never leave printer unattended if you are not sure if first layer is printed correctly
