F-900 Instruction Manual 8/14/2017
1554 NE 3
rd
Ave, Camas, WA 98607, USA Phone: (360) 833-8835
11
www.felixinstruments.com
Operating Instructions
To turn the instrument on, press the green power button. The top of the display reads F-900 and
the current firmware version the unit is running. For information on the latest firmware version,
please visit the F-900 software webpage (
http://felixinstruments.com/support/f-900-support
Below this, a menu will appear on the display with the following options: Measure, Setup, View
and File. This is the F-900 Main Menu. After the instrument is powered on, the uptime and
battery life remaining will be displayed on the bottom line. The uptime, or time the instrument
has been powered on, is displayed in hours: minutes, followed by the battery life in percent.
Note:
If the F-900 does not power on, eject the SD card or disconnect the mini-USB cable from
the front of the instrument. Then, power the F-900 on. Re-insert the SD card or reconnect the
charger.
Figure 8: The options on the Main Menu of the F-900.
Use the up and down arrows to switch between menu options and the right arrow to select.
Press the green power button to power off the F-900.
Note
:
To force a power off and reset of the F-900 at any point,
press and hold the power
button for 10 seconds
.
This “emergency hard shut-down” feature exists to address hardware
or software problems and should not be used except when needed.
Summary of Contents for F-900
Page 2: ......
