FAQ • VIMBLE 2S
6) How do I initialize the Vimble 2S?
Instruction of initialization:
The LED will turn solid blue once you tap the
function button 5 times. The gimbal will automatically detect whether or not it
is placed on a static flat surface. Initialization will be done automatically (LED
flashes blue three times to indicate initialization is done) once the gimbal has
detected that it is placed on a static flat surface. Otherwise, the gimbal will keep
trying to detect a flat surface. When initialization is done successfully, single tap
the function button to wake up the gimbal.
7) Is it okay to charge my smartphone and my gimbal
at the same time?
It is fine to charge both your gimbal and smartphone at
the same time, as shown below. However, if the battery
power is quite low and the charging current of the
smartphone is overwhelming, the Vimble 2S will shut
down.
8) How do I tell if the battery of the gimbal is low?
The indicator informs on the change in battery power. When the indicator
turns into a circular red light, it means battery is low. When it flashes red three
times (repeatedly), it means the battery is quite low and gimbal the should be
charged.
9) How do I clear the Bluetooth pairing history?
When Vimbe2S is off, press the Bluetooth shutter, function button and trigger
button at the same time for about 2-3 seconds. The indicator light will flash blue
three times. Next, restart the gimbal.
10) How do I perform object tracking in the Feiyu On App?
Choose the object you want to track and when the blue box turns green, it
means the object is locked. Then the gimbal makes adjustments so that the
locked object moves to the center of screen, and always follows movements of
the locked object afterwards.
It is better to choose the object which has big differences from its surroundings.
If the object is in a complex environment, or the shape of the locked object is
changed, there is some probability that tracking will fail.
Object tracking could be performed in all working modes.
