FAQ • G6 MAX
SET UP & OPERATION
1) How do I balance the G6 Max?
Place tilt motor on right side (from user view)
Camera: Mount the camera on the quick release plate, slide it into the fixed
plate from left to right, then fix the safety lock while it is in a suitable position.
Smartphone:
You need to attach a smartphone adapter (standard accessory)
on the quick release plate before mounting the smartphone.
Action camera:
Before mounting the GoPro, tighten the T clamp adapter
(a standard accessory) on the fixed plate by 1/4inch thumb screw.
2) How do I know if the three axes are balanced?
Unlock axis motor:
G6 Max has 3-axis motor locks, unlock the tilt/roll axis
to release storage status firstly. Place the cross and slide arm to its working
position, then lock the axis motor for mounting and balancing the camera.
Make sure to unlock each axis motor in order when balancing. Please balance
the gimbal well before powering on.
Tilt axis balance:
Follow these steps: Place camera in upward balance/
forward balance; Once the camera can stay still in any angle, balancing is done
successfully.
Roll/Pan axis balance:
Move the cross arm left-right to balance the axis.
Tighten the axis ring when well-balanced.
3) How do I initialize the G6 Max?
1
Single tap the power button twice, then switch the interface to interface 2
on the OLED. Next, select the “Calibration” option by pushing the joystick
up or down. Confirm the option by pushing the joystick to the right.
2
The gimbal will automatically check whether to be put on a steady flat.
3
Once the screen shows “Calibration Completed”, pick the gimbal up, click
“ESC” on the screen to finish calibrating.
