3
2
Manual Version 1.0
FY WG is a lightweight, yet feature-rich, wearable 3 axis gimbal capable of capturing immersive and fully stabilized footages. It is
compatible with GoPro HERO4/ 3+/ 3 (with optional mounting space for GoPro LCD BacPac) and other cameras with similar dimensions.
The FY WG is a miniaturized version of the best-selling FeiYu gimbal, offering exceptional stabilization technology in a wearable form factor
for action cameras. A GoPro T-Clamp adapter is packaged with every FY WG. Users can attach the gimbal to any accessories supporting
the GoPro three-prong mount. The FY WG also contains two 1/4"-20 tripod mounts on its gimbal body, allowing the gimbal to be mounted
in different orientations to all universal tripod screw mount accessories (including helmets, bikes, selfie sticks and other accessories).
Operation
LED Status
Function
* When the gimbal is in the Inverted Mode, pressing the function button three consecutive times will revert back to the original orientation.
When the battery is low, the gimbal will make three beeping sound and automatically shut down itself.
Turn On And Switch To
The Mode
’
s LED Status
Turn Off After
A moment
Power On
Sound
Two Beeps
Three Beeps Shutdown
The LED light will flash distinctively to indicate different operating modes.
Switch between different operating modes by pressing the function button.
Remove the screws on the
battery compartment,
insert two16340 batteries
and tighten the screws.
Mount the camera carefully
to the mounting bracket
and tighten the screws.
Ensure the camera is mounted securely. Press and hold the function button
for 2 seconds. The LED light will turn blue.
Press the function button and hold for 3 seconds, it will be powered off.
Function
Button
Function
Button
Operating Modes and Functions
Operating Modes and Functions
Function Button
（
ON / OFF
）
Tilting Axis
Rolling Axis
Panning Axis
Function
Interface
1/4 Inch Screw Hole
1/4 Inch
Screw Hole
Screws For
The Battery
Compartment
Video And Camera
Charging Interface
T-Clamp Screw Hole
T-Clamp
Screw Hole
T-Clamp
Screw Hole
Introduction
Install
4
Accessories
Operation
1
Rolling
Tilting
Panning
Function
Button
Hexagonal Socket
Head Cap Screw
T-Clamp
Accessories For
1/4 Inch Screws
STEP 1
STEP 2
STEP 3
POWERING
ON / OFF
The Gimbal can be mounted in two different ways. For use with GoPro
Accessories, mount the provided T-clamp to the side or the bottom of
the gimbal. Attach T-clamp to any accessories supporting the standard
GoPro three-prong mount. The gimbal can also be mounted directly to
other accessories using the standard 1/4" tripod mount. Tighten all
screws and ensure it is firmly mounted before using the gimbal.
USB Cable
USB Connector
Extension Knurled
Thumb Screw
Charging
USB Cable
FY WG 3 Axis Wearable Gimbal is compatible with GoPro HERO4 / 3+ / 3 and cameras with
similar dimensions. Reserved mounting space for GoPro LCD Touch BacPac
Do not power on the
gimbal before completing
all the installation steps.
Do not power on the
gimbal before completing
all the installation steps.
!
WARNING !
WARNING !
Camera stays in its current orientation. All panning, tilting and rolls are restricted.
Mode #1
- Panning Mode
Camera is permitted to pan left or right. Vertical tilts or rolls are restricted.
Mode #2
-
Panning and Tilting Mode
Camera is permitted to pan left or right and tilt up and down. Rolls are restricted.
Mode #3
- Lock Mode
Inversion Mode
Pressing the function button three consecutive times in any operating mode, the gimbal will switch to the
Inverted Mode (Allowing the user to flip the gimbal orientation upside down). Pressing the function button three more times
while in Inverted Mode to switch back to the original orientation
.
Manual Pulling Locking
After the gimbal has been powered on for eight seconds, the tilt angle can be adjusted manually in the Panning Mode
and the Lock Mode. Adjust the title angle to the desired position and wait for 0.5 second until the gimbal registers the new angle.
Tilt and Level Calibration
By using the optional G4 Remote Control, tilt and level can be adjusted without the need to connect to a computer.
For more information, please refer to G4 Remote Control section in the instruction manual.
Panning Speed Adjustment
By using the optional G4 Remote Control, the follow speed of panning can be adjusted without the need to connect
to a computer. For more information, please refer to the G4 Remote Control section in the instruction manual.
Reset
Pressing the function button four consecutive times will reset the gimbal to initial orientation.
Long Press
For 1 Second
Long Press
For 2 Second
Long Press
For 3 Second
On Constantly
Operation
LED Status
Function Explanation
Lock Mode
Function Button Quick Reference
Double Tap
Single Tap
LED Flashes Once
LED Flashes Twice
Panning Mode
Panning and Tilting Mode
Triple Tap
LED Flashes Once
Inversion Mode
Quadruple Tap LED Flashes Once
Reset
Charger
Input: DC 5V Min 800mA
Output: DC 4.2V
Type: 18350
M2*6mm
Rechargeable
Battery
Long screw
M 1.5 Allen Key
T-Clamp
Quick-Release
Buckle
Curved Adhesive
Mounts
3M Adhesive
USB Power
Adapter
（Not Included）
Hexagonal
Socket Head
Cap Screw
Forward
Inverted
Vertical
Camera In Left
Camera In Left
Camera In Left
Camera in Right
Camera in Right
Camera in Right
