background image

SOLAR LED MINI ISLAND TORCH 

MODEL: TORCH2/LED/3

FEIT ELECTRIC COMPANY | PICO RIVERA, CA, U.S.A. www.feit.com

WARNING: KEEP DEVICE AWAY FROM FIRE OR BEING FULLY IMMERSED IN WATER.

ON/OFF Button

Solar Panel

Torch Head:

Solar Panel LED bulb

Female adapter for 

Landscape installation

Battery Coupler

Battery

Battery Tag

Stake

Mounting pipe

Torch Head with 
Lithium-ion 800mAh battery

Mounting Posts

Ground Stakes

Battery Couplers

Female Adapters

3

3

3

3

3

PARTS INCLUDED

REV007

ASSEMBLY AND INSTALLATION

Carefully remove the fixture and hardware from package 
and make sure that no parts are missing by referencing 
the contents on right.  

Please remove the Battery tag from inside the fixture before use. 

(Figure 2)

Each fixture has an ON/OFF button.  Before installing torch, press ON/OFF 
button to the ON position.  Device will automatically turn on at night 
and turn off at dawn.

Assemble all post sections together using couplers to achieve desired 
height and attach plastic  ground stake (if required) to the bottom of 
assembled post. 

Secure torch head onto assembled mounting post after using male and 
female couplers to achieve desired height. 
 
Select a location with full direct sunlight and push the ground stake 
into the ground. Insert ground stake deep enough into the ground to 
ensure fully assembled torch is stable and does not tip over. 
Do not push on the torch head or you may damage the device.

NOTE: When installing product in hard or dry soil, water the soil 
several hours beforehand to make the installation easier. You can 
also break up the ground lightly with a stake or a fork. Don’t force 
stake into the ground as excess force can break or bend the stake. 

1

2

3

4

5

6

CHOOSE THE BEST LOCATION FOR YOUR TORCH

CAUTION: DO NOT OVER TIGHTEN THREADED RODS!

Select a location with full and direct sunlight.  If installed in a shady area, the battery 

will not fully charge and will reduce the night-time working hours. 

Operating time should be up to 8 hours with full charge. 

For optimal performance at night, the solar panel should receive a minimum of 8 

hours of sunlight per day.

Do not install near night-time light sources such as porch lights or street lights. These 

light sources may cause the solar panel to turn the product off.

Solar torches work independently of each other because 

they are not wired. Torches should not be placed closer than

5 feet from one another. 

IP65 WET RATED FOR OUTDOOR USE
CHARGING TIME: 68 HOURS
WORKING TIME: UP TO 8 HOURS ON A FULL CHARGE

battery tag

(Figure 1)

(Figure 2)

Do Not hold the torch head when tightening. Hold the rods 
and lock them in place slowly. 

(Figure 1)

Summary of Contents for TORCH2/LED/3

Page 1: ... stake into the ground Insert ground stake deep enough into the ground to ensure fully assembled torch is stable and does not tip over Do not push on the torch head or you may damage the device NOTE When installing product in hard or dry soil water the soil several hours beforehand to make the installation easier You can also break up the ground lightly with a stake or a fork Don t force stake int...

Page 2: ... sunlight everyday If the solar panel does not receive enough sunlight during the day e g due to cloudy or overcast weather conditions it will be recharged on the next sunny day and resume operation Cleaning To ensure proper operation it is important that the solar panel is kept free from dirt and debris If the solar panel is not cleaned periodically it will not allow the battery to fully charge a...

Page 3: ...stallation Vous pouvez également casser le sol légèrement avec un pieu ou une fourchette Ne forcez pas le pieu dans le sol car une force excessive peut casser ou plier le pieu 1 2 3 4 5 6 CHOISISSEZ LE MEILLEUR EMPLACEMENT POUR VOTRE TORCHE Sélectionnez un emplacement avec la lumière du soleil directe et complète Si elle est installée dans un endroit à l ombre la batterie ne se chargera pas complè...

Page 4: ...ur le maximum de lumière directe et directe Si le panneau solaire ne reçoit pas suffisamment de soleil pendant la journée par exemple en cas de temps nuageux ou couvert il sera rechargé le jour ensoleillé suivant et reprendra son fonctionnement Nettoyage Pour assurer un fonctionnement correct il est important que le panneau solaire soit exempt de saleté et de débris Si le panneau solaire n est pas...

Reviews: