1
Outdoor
G
P
I
:
ENERAL RODUCT NFORMATION
This product is safety listed for wet locations.
This instruction shows a typical installation.
1
2
1A
3
4
5
Installation Instructions for
Roscoe Outdoor Post
1.0
OL12907
OL12907
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Insert the diffuser into the diffuser base, place the housing over the diffuser, and secure it in place using the housing
screws.
POST
POST SCREW
6
CAUTION RISK OF FIRE
-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
2
3
4
5
DIFFUSER
DIFFUSER BASE
HOUSING SCREW
4
HOUSING
LAMP
