background image

 

© FEISOL INC, USA

        WWW.FEISOL.NET        

 Page 1 of 4

 

User Manual 

 FEISOL CT-3441S, CT-3441SB and CT-3441T 

 
A. 

Center Column Operation 

 

 

To extend the pre-installed Center Column upward, please unlock the twistlock located just 
above the mainframe (see picture) by turning it half a turn in counterclockwise direction.  
After the Center Column is extended to the desired height, turn the twistlock in clockwise 
direction to securely lock the column into place.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
For additional extension (CT-3441S and CT-3441SB only) there is a telescopable second 
Center Column Section which can be released by turning the top twistlock located just 
below the top of the lower Center Column Section (see picture) a half turn in 
counterclockwise direction, extending, and securely re-locking the twistlock. Please do not 
over-tighten. 
 
 
 
 
 
 
 

 

 

 

 

 

 
 
 
 
 
 
 

Summary of Contents for CT-3441S

Page 1: ...ection After the Center Column is extended to the desired height turn the twistlock in clockwise direction to securely lock the column into place For additional extension CT 3441S and CT 3441SB only there is a telescopable second Center Column Section which can be released by turning the top twistlock located just below the top of the lower Center Column Section see picture a half turn in counterc...

Page 2: ...rning the wrenches in opposite directions C Leg Extension In order to extend a leg section turn the twist lock approximately one half turn in counterclockwise direction Note If the twistlock is turned too far the leg section may fall out and compression rings may become lost or damaged To firmly lock a leg section into place turn the twist lock approximately one half turn in clockwise direction Pl...

Page 3: ... bags to be attached to the tripod The hook can be screwed onto the bottom plate of the pre installed Center Column see picture E Ball Head optional Installation Making sure that the Center Column is securely locked screw the Ball Head onto the mounting screw by turning the Ball Head clockwise see picture Please do not over tighten Note CT 3441SB models have a Ball Head pre installed already ...

Page 4: ... Installation For exchanging Center Columns on the tripod unscrew the plate at the bottom of the Center Column by turning it counterclockwise see picture Next unlock the twistlock of the Center Column by turning it one turn in counterclockwise direction and pull the Center Column out of its mount After unscrewing the bottom plate of the Short Column to be installed slide the Column into the mount ...

Reviews: