Grinding
34130529060
Printed in Germany
Disassembly
C-SC_CSSM
Version 1.0
10.03.2021
Page
35
of
73
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
8.4.4 Disassembling the shaft
Steps that must be completed:
-
Removing the handle and safety hood
-
Remove the clamping unit
-
Removing the bearing plate
-
Disassembling the bearing plate
Tools:
-
Circlip pliers
-
Arbor press
-
Punch, 10 mm
1.
Remove the circlip (
1
).
2.
Remove the washer (
2
).
3.
Remove the pressure piece (
3
).
4.
Remove the twelve disc springs (
4
)
I
NFORMATION
Press down on the washer (
2
).
C
AUTION
!
The spring is under tension.
Risk of injury.
Ensure the punch does not slip.
1
2
3
4
