Milling
34130534060
Printed in Germany
Disassembly
C-SC_CSSM
Version 1.0
16.04.2020
Page
22
of
68
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Removing the grooved ball bearing (cover)
Steps that must be completed:
-
Removing the guide plate unit
-
Removing the handle
-
Removing the gearbox unit
-
Removing the drive shaft
Tools:
-
Arbor press
-
Sleeve, 35 mm outer diameter
-
Sleeve, 48 mm outer diameter
-
Slotted screwdriver
1.
Press out the grooved ball bearing.
I
NFORMATION
The grooved ball bearing is destroyed during removal and
must be replaced.
2.
Remove the sealing ring (
1
).
I
NFORMATION
The sealing ring (
1
) is destroyed during removal and must be
replaced.
3.
Press out the
washer
(
2
).
1
2
