Metal core drilling
Removal
C-SC_CSSM
Version 1.0
11.02.2019
Page
23
of
88
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
8.2.7 Removing the guide
Steps that must be completed:
-
Removing the electronics
-
Removing the drill motor
Tools:
-
Socket head wrench, 4 mm; 2.5 mm; 3 mm
-
PH2 cross-tip screwdriver
-
Torx T10
1.
Unscrew the screw (
1
).
2.
Move the guide upwards using the spider.
3.
Remove the guide.
4.
Unscrew the screw (
2
).
5.
Unscrew the flat headed screw (
3
).
1
2
3
