Kernbohren Metall
Assembly
C-SC_CSSM
Version 1.0
01.04.2019
Page
61
of
89
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.1.9 Positioning the electronics
Steps that must be completed:
-
Assembling the electronics
Tool(s):
-
Torx T15, T20
1.
Position the cover (
1
) with the electronics.
2.
Position the mains cable (
2
).
3.
Position the cable clamp (
3
).
4.
Screw in the screw (
4
) [0.9 Nm ±0.1 Nm].
5.
Connect the cable (
5
) as shown in the connection
diagram.
6.
Connect the cable (
6
) as shown in the connection
diagram.
7.
Screw in the screw (
7
) [1.5 Nm ±0.2 Nm].
8.
Screw in the screw (
8
) [1.8 Nm ±0.1 Nm].
4
3
1
7
5
6
8
2
