Fein BSS 1.6, Instruction Manual

Page: 16 / 59

16
en
Instruction manual for slitting shears.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Be absolutely sure to read the enclosed documentation such as the Instruction Manual and the
General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Confirms the conformity of the power tool with the directives of the European Community.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Product with double or reinforced insulation
Ø Diameter of a round part
Max. work-piece thickness for steel with up to 400 N/mm
2
Max. work-piece thickness for steel with up to 600 N/mm
2
Max. work-piece thickness for steel with up to 800 N/mm
2
Max. work-piece thickness for aluminium with up 250 N/mm
2
Blade, straight
Blade, curved
Min. inside curve radius
Pilot-drill for inside cut-outs
Weight according to EPTA-Procedure 01/2003
Character Unit of measure, international Unit of measure, national Explanation
n
0
/min spm Stroke rate at no-load
n
S
m/min m/min Cutting speed
P
1
W W Power input
P
2
W W Output
M… mm mm Size of metric thread
L
wA
dB dB Sound power level
L
pA
dB dB Sound pressure level
K… Uncertainty
m/s
2
m/s
2
Acceleration
m, s, kg, A, mm, V, W, Hz,
N, °C, dB, /min, m/s
2
m, s, kg, A, mm, V, W, Hz,
N, °C, dB, rpm, m/s
2
Basic and derived units of
measure from the international
system of units
SI .
WARNING
Fe 400
Fe 600
Fe 800
Al 250
r
Ø
3 41 01 111 06 0.book Seite 16 Donnerstag, 10. April 2008 8:11 08