Rotary Drills
Fitting
C-SC_CSSM
Version 1.0
01.01.2019
Page
42
of
47
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
9.2.8 Fitting the electronics
Steps that must be completed:
-
Fitting the stator
Tools:
-
Torx T15
-
PH2 cross-tip screwdriver
1.
Position the brush holder (
1
).
2.
Screw in the two screws (
2
).
3.
Position the cable (
3
).
4.
Screw in the screw (
4
).
5.
Repeat steps 1 to 4 on the opposite side of the machine.
6.
Position the electronics (
5
).
7.
Screw in the two screws (
6
).
8.
Connect all cables as shown in the connection diagram.
6
5
2
3
1
4