Rotary Drills
Removal
C-SC_CSSM
Version 1.0
01.01.2019
Page
15
of
47
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
8.3.2 Removing the electronics
Steps that must be completed:
-
Removing the carbon brushes
Tools:
-
Long-nosed pliers
-
PH2 cross-tip screwdriver
-
Torx T20
1.
Remove all plug connections from the electronics.
2.
Unscrew the two screws (
1
).
3.
Remove the electronics (
2
).
4.
Unscrew the screw (
3
).
5.
Remove the cable (
4
).
6.
Unscrew the two screws (
5
).
7.
Remove the brush holder (
6
).
8.
Repeat steps 4 to 7 on the opposite side of the machine.
1
2
5
4
6
3