FRT: A
BLK 1.3 TE/CSE, 1.6 E
Repair instructions
C-SC_CSSM
2012.07
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
32/33
7.8. Assembly
– Motor / gearbox
1. Fit upper section of housing and screw in place.
2. Seal sealing surface between intermediate bearing and gearbox head with Loctite 574.
3. Please sealing ring on intermediate bearing.
4. Fit gearbox head on intermediate bearing and screw in place.
5. Fit holding down device.
6. Perform function check.
Tool:
-Torx 15 screwdriver
-Loctite 574