Before Use:
When moving the microscope use both hands,
holding by the handle at the back (1) and the base
(2) as shown at right.
Do not shake or drop the microscope.
Do not not expose the microscope to
direct sun, high temperatures, dust, or
damp environments. Use a flat work
surface. Indoor operating temp
41°~104°F (5°~40°C), max relative
humidity of 80%.
When working, the surface of the light source
will be warm. Make sure there is enough room
for the heat to dissipate around the light
source.
Voltage range of 100~240V is supported.
Additional transformer is not necessary. Use
only an outlet with voltage in this range and
use the power cord supplied with the
microscope.
Set the power switch to off “O” before
replacing a bulb or fuse, and wait until the
lamp is cool. The power switch (3) is located on
the back of the base of the microscope.
Microscope uses 12V, 100W halogen bulb.
(Part# 12v100wH).
Page 4
