TST
Assembly instructions
FUF2 / FU3F-A/-C/-F
FEIG ELECTRONIC GmbH
Page 11 of 114
TST_FUxF-A-C-F_Montageanleitung_EN_15
1.3 Target group
These assembly instructions are specifically intended for commissioning engineers of the TST FUF2 or
TST FU3F controller from FEIG ELECTRONIC GmbH.
The assembly and commissioning of the controller may only be carried out by officially qualified electricians
familiar with the safety standards of electrical drive and automation technology.
1.3.1 Personnel qualification
Controller from FEIG ELECTRONIC GmbH may only be operated and maintained by persons who comply
with the requirements outlined here and are familiar with the safety standards of electrical drive and
automation technology.
All the person groups specified here must have read and understood this assembly manual before using the
controller.
Persons under the influence of drugs or alcohol or who have taken medicines which restrict their reactive
ability are not permitted to perform work on the controller.
The assembly manual differentiates between the following groups:
Person group
Requirement
Authorisation/task
Operating
company
The operating company is in possession of the controller
and is responsible for ensuring its intended use. It is to
ensure that all persons performing tasks on the controller
have been given professional training and fulfil the
requisite bodily and mental requirements for dealing with
the controller.
▪
Deploy authorised
personnel
▪
Deploy the product
in accordance with
its intended use
▪
Training
Operator
The operator was informed of the function of the controller
and is able to operate the assembled and installed
controller.
Operators include all persons who deal with the machine
over its various life phases. This can be specialist
personnel with or without special training or laypersons.
▪
Operation
Qualified specialist
personnel
The qualified specialist personnel has been provided with
training pertaining to working with electrical equipment
and informed about possible dangers resulting from
improper behaviour.
The qualified specialist is familiar with the necessary
protective measures and devices. Furthermore, through
the specialists professional training and experience as
well as its contemporary professional activity, the
specialist has the necessary knowledge for testing work
equipment.
▪
Unpacking
▪
Assembly
▪
Installation
▪
Commissioning
▪
Repair
▪
Operation
▪
Programming
▪
Disposal
▪
Checking