Identifikation System OBID
i-scan
Page 14 of 20
FEIG ELECTRONIC GmbH
E N G L I S H
1. Safety Instructions / Warning
Please read before startup !
•
The device may be used only for the purpose intended by the manufacturer.
•
The Mounting Instructions should be kept in an accessible location and handed out to every
user and maintenance person.
•
Non-approved modifications and the use of replacement parts and accessories which have not
been purchased or recommended by the manufacturer of the device may cause fires, electrical
shocks and injury. This will furthermore result in exclusion of liability and loss of warranty on
the part of the manufacturer.
•
The warranty conditions in effect at the time of purchase shall be considered valid. No liability
is assumed for inappropriate, improper manual or automatic setting of parameters for a device
or for improper use of a device.
•
Repairs are to be performed only by the manufacturer.
•
Hookup, startup, maintenance, measuring and tuning work on the device must be performed
only by electrical specialists who have received the relevant accident prevention training.
•
When handling devices which come into contact with electrical voltage, the valid safety regula-
tions must be observed.
•
Before opening the device always turn off the supply voltage to the Reader and use a test in-
strument to verify that the device is unpowered.
•
When working on an opened device note that the components may carry voltages of up to
1000V.
•
All work on the device including installation must be in conformance with national electrical
regulations as well as with local code.
•
The device must be installed and electrically connected in accordance with the recognized
technical regulations in the country where it is being installed and according to other regional
codes.
•
The user is cautioned that changes or modifications not expressly approved by the
FEIG ELECTRONIC GmbH could void they our authority to operate this equipment.