OBID i-scan
®
Application Note
ID ISC.ANT1400/760-C/B
FEIG ELECTRONIC GmbH
Page 23 of 31
N70100-0de-ID-B.doc
E N G L I S H
2.3 Configuration and Setup using Antennas Type -C and -B
2.3.1 Required Components
To construct a multiple gate you need the following components:
-
Qty. 1 Antenna ID ISC.ANT1400/760 Type C (with Reader and Multiplexer)
-
Qty. 2 to 4 Antenna ID ISC.ANT1400/760 Type B or BL
-
If 3 or 4 Antennas Type B are used you need for the 3
rd
and 4
th
an ID ISC.ANTEC-
7,20m Coax – Extension cable
-
Qty. 1 power supply ID ISC.NET24-B
-
Power cable, interface cable and connection cable for the DC power supplies (2-wire,
twisted pair)
-
Mounting materials (screws, anchors)
Optional:
-
Qty. 1 Alarm Kit ID ISC.ANT1400/760-AK
To calibrate the Reader you will need the software
-
ISOStart Version 7.03 or higher
and for tuning the antennas the service software
-
DATuningTool Version 1.00 or higher
on a personal computer running under Microsoft
®
Windows
®
. The service software is included on
the
OBID
i-scan
®
CD obtained from FEIG ELECTRONIC GmbH or can be downloaded at the
Download Area of the Homepage www.feig.de.
