OBID
®
classic-pro
Montage
ID CPR.M02
FEIG ELECTRONIC GmbH
Seite 10 von 42
M21001-3de-ID-B.doc
D E U T S C H
3.2.1. Spannungsversorgung
Für die Spannungsversorgung des ID CPR.M02 dürfen nur geregelte DC-Spannungen verwendet
werden.
Im Falle von getakteten Netzteilen zur Versorgung des Moduls ist auf eine ausreichende Filterung
der Versorgungsspannung zu achten.
Störungen der Versorgungsspannung können sich in einer Reduzierung der Lese- und Schreib-
reichweite des Modules auswirken.
Die Länge des Zuleitungskabels der Spannungsversorgung sollte möglichst kurz sein. Sie darf 3 m
nicht überschreiten.
Beschreibung
X1
Pin-Nr.
Kurzzeichen
ID CPR.M02
8
VCC *
+ 5 V DC
±
5%
9, 4
GND **
GND
*
Nur geregelte DC-Spannungen verwenden !
** Die GND-Pins 4 und 9 sind auf dem Readermodul
direkt miteinander verbunden
Tabelle 3.2.1-1: Pinbelegung der Spannungsversorgung an X1
HINWEIS:
•
Eine Verpolung der Versorgungsspannung kann zur Zerstörung des Gerätes führen.
•
Versorgungsspannungen außerhalb der Spezifikation können zur Zerstörung des Gerä-
tes führen.
Summary of Contents for OBID Classic-Pro ID CPR.M02 Series
Page 23: ......