Feig Electronic ID ISC.LRU3000, Manual

Page: 52 / 193

OBID i-scan
®
UHF Manual ID ISC.LRU3000/3500
FEIG ELECTRONIC GmbH Page 52 of 193 H90202-7e-ID-B.docx
7.9. CFG10: Trigger
The configuration block contains parameters for the trigger configuration.
Byte 0 1 2 3 4 5 6
Contents TRIGGER-
MODE
TRIGGER-
USE-A
TRIGGER_1-HOLD-TIME
0x00
TRIGGER_2-HOLD-TIME
0x00
TRIGGER_3-
HOLD-TIME
MSB
Default 0x00 0x00 0x0005 0x0005 0x00
500ms 500ms
Byte 7 8 9 10 11 12 13
Contents TRIGGER_3-
HOLD-TIME
LSB
TRIGGER_4-HOLD-TIME TRIGGER_5-HOLD-TIME TRIGGER-
USE-B
0x00
Default 0x05 0x0005 0x0005 0x00
500ms 500ms
TRIGGER-MODE
defines the mode of the scanner.
Bit 7 6 5 4 3 2 1 0
Function Trigger 0 Condi-
tion
0 0 0 0 Unlimited
Valid Time
Trigger: (OperatingMode.BufferedReadMode.Trigger.Enable)
(OperatingMode.NotificationMode.Trigger.Enable)
(OperatingMode.ScanMode.Trigger.Enable)
b0: Trigger disabled:
The Reader RF Power is on and the Reader scans all the time in BRM
Mode.
b1: Trigger enabled:
The Reader start the RF Power and the scan, if the trigger is activated
by the external switch.
NOTE:
If Trigger is enabled and not activated by the external switch, the RF-field will be switched
off.