IDENTIFICATION
ID ANT.U290/290-EU
3 Installation
INSTALLATION
Page 6 of 11
3 Installation
Installation
The ID ANT.U290/290-EU is designed to be mounted outdoors. Four holes for M5 screws are provided on
the backside of the housing for mounting on a VESA bracket. The screws used should have a screw-in depth
of maximum 8 mm (0.3"). For secondary protection the antenna can be secured by means of an eye bolt,
that should be fixed with screw locking varnish, and e.g. a wire rope. The suitable accessory ID ANT.UEB-A
can be purchased from FEIG ELECTRONIC.
Fig. 1: Dimensional drawing – back view
