10
Cutting
Use a flush cutting saw blade (or “e-cut blade”) for making precise cuts in tight areas, close to
edges, plunge or flush to a surface. It is important not to force the tool during the flush cutting. If
you are experiencing a strong vibration in your hand during the cut, it indicates too much
pressure on the tool. Back off on the pressure and let the speed of tool do the work. For typical
uses for flush cutting saw blade.
NOTE: It is suggested that you have a piece of scrap material supporting the blade when
making a flush cut. If you need to rest the blade on a delicate surface, you need to use
cardboard or masking tape to protect the surface.
Use the segmented saw blade for making continuous precise cuts in wood, plaster or drywall
material. Applications include cutting for electrical boxes, repairing flooring, cutting flooring for
venting, and more.
Sanding
With sanding accessories, this tool is a detail sander. It is suitable for dry sanding of wood,
plastic, and metal surfaces, especially in corners, edges and hard to reach areas.
Tips:
1. Work with the complete surface of the sandpaper, not only with the tip.
2. Sand with continuous motion and light pressure. Do not apply excessive pressure. Let tool do
the work.
3. Always secure small work pieces.
4. Select suitable abrasive paper for best results.
Selecting the sanding sheet
-
A sanding sheet should be selected depending on the material to be worked and the required
rate of material removal.
Grain size 80: For face-sanding and levelling small irregularities
Grain size 120: For face-sanding and levelling small irregularities
Grain size 180: For finish- and fine-sanding of wood
Scrapping
Scraper blades are suitable for removing vinyl, varnish, paint layers, carpeting, caulk and other
adhesives.
Use a rigid scraper blade to remove harder materials, such as vinyl flooring, carpeting and tile
adhesives in a large area.
Use a flexible scraper blade (not included) to remove softer material such as caulk.
Tips:
1. When removing strong, tacky adhesive, grease the scraper blade surface to reduce gumming
up.
2. Begin with light pressure. The oscillating motion of accessory only occurs when pressure is
applied to the material to be removed.
3. If you are removing caulk from a delicate surface, such as a bath tub or tile back splash, we
recommend taping to protect the surface that the blade will rest on.
