FEI Quanta FEG 250, User'S Operation Manual

Page: 36 / 228

Software Control: xT microscope Control Software
4-8
THE TITLE BAR
displays the application icon and name plus the standard Windows
buttons:
Minimize and Close , which are enabled.
FIGURE 4-3 THE TITLE BAR
The Close button quits the xT microscope Control software
(accelerating and detectors voltages are switched off for the security
reasons).
THE MENU BAR
displays pull-down menus across the screen below the Title Bar.
FIGURE 4-4 THE MENU BAR
Select pull-down menus from the menu bar by pressing:
• clicking over the Menu title
• ALT + underscored keyboard letters
• ALT and then use keyboard arrows
Note:
Some menu functions have their equivalents in the toolbar. In such
cases, the corresponding toolbar icon is shown next to the function
title in the following text.
The File Menu (Alt + F)
opens File menu administrative functions:
Open…
displays a standard dialogue for opening images previously stored to
a media. Supported file formats are TIF8/16/24, JPG and BMP, but
only files saved from xTUI in
TIF format contain the active processing
information, which could be utilized later for a databar setting (see the
Preferences… / Databar tab).
The dialogue displays, by default, the location (path) last used to open
or save files from the xTUI.
Save (Ctrl + S)
saves the image using the format, location and base of name set by
the last used
Save As function in that quad. An incremental suffix with
a selectable number of digits ensures that every image is saved as a
new file, e.g. Name_001.tif, Name_002.tif, etc.
Save As…
opens a dialogue for saving images, which provides an opportunity to
change the file name and location. An image can be saved in
TIF8 /
TIF16 / TIF 24 / JPG / BMP file format.