21
3.3 Manual Searching and setting:
Confirm that the transmitter has entered a normal working
condition and then turn on the monitor, press “MENU” and select
“RF” signal input. “BAND: X CH: X” will display on the top left corner
of the screen, press “
” to switch channel A/B/E/F/R. Press
“
”to select 1~8 channels. If the time transmitter has
worked, receiver and transmitter frequency in agreement, the
receiver will receive the signal sent from the transmitter and
displayed on the monitor
Note: The effect of receiving the distance has a great
relationship with the reception power of the transmitter and
the receiver venues. If the reception is poor, the antenna can
be replaced with three leaves, four leaf antenna or panel
antenna. Replace the antenna should pay attention to the
antenna and receiving the same frequency.
4. Operating instructions
This monitor has HDMI, VIDEO, AUDIO input and VIDEO output
port, suitable for a variety of usage environments. From VIDEO,
AUDIO DVR video input can be entered recording(HDMI without
recording function), VIDEO output signal can be straight-through
video signal , can also be the DVR replay video signal (consistent
with the image displayed on the screen).
