Series ’90 Refrigerated Bakery
Page 8
Lights
Make certain that the light cord plugs are completely inserted into the sockets or arcing
may result causing damage to the plugs and sockets.
The ballasts used on this case allow removal of one or more shelf lights without affecting the
remaining lights.
Shelving
Remove both rear doors from the track by lifting them upward until the bottom edge clears
the lower door track and then outward.
Lift up the front glass to the fully open position.
Put the shelf support assembly in the desired shelf standard slots.
Plug the shelf light cords in the appropriate light socket. Make certain that the light cords
are completely inserted into the sockets or arcing may result causing damage to the plugs
and sockets.
Put the wire shelves on the rear shelf support assembly as shown. Push the bar on the
bottom of the wire shelf into the shelf retainer clip on the shelf support assembly. If the
shelf is not in the proper position, it may disrupt the air flow in the case and cause product
loss.
Close the front glass and reinstall both rear doors.