CONDITION
Case Does Not Operate
Check that the MAIN power switch is on.
Check the circuit breaker box for tripped circuits or blown fuses.
Check that the unit is plugged in.
Check that the control for each shelf is on and is not displaying an error.
Case Lights Are Not Working
Check that light switch is on.
Shelf lights – lamp cord must be fully seated into receptacle, gently tap them
in with a rubber mallet if needed to make full contact. Check that the lamp
cord is plugged into the end of the LED light strip.
Check power AC input voltage at LED driver.
Check to DC output voltage at LED driver.
If no output, disconnect output from unit wiring harness and try again as LED
driver will go into protect mode if output harness has a short.
LED LIGHTS
HSSM
Heated Merchandiser
3
