49
Operations
Description, Specifications, Installation, Operation, and Service Manual
J1
Network Port
1 and 2 Transmit data pair, balanced line
3 and 6 Receive data pair, balanced line
4, 5, 7, 8 AC coupled ground
Table 35 Indicators for the UVIC-IP
D1
CPU Heartbeat indicator, green
D2
Transmit data indicator, red
D3
Receive data indicator, yellow
D4
Power indicator, green
Figure 12 Serial to Network Board
Federal Signal Corporation Copyright 2006
CONFIG/FLASH
RXD
TXD
LEVEL
OUTPUT
POWER
CPU
2005457_
GND
DEFAULT
+12V
+
T1
JP1
JP7
JP5
JP2
JP3
JP4
JP6
J1
L1
291351A
D4
D1
D3
D2
R1
Audio Out
Audio Out
Adjust
To IP
COMMS
To Serial
Interface
Input
Power
Connectors for the Front Panel
The following table provides settings and interface inputs and outputs for the UV+
controller card.
Table 36 UV+ Controller Card Setting I/O
J1
Pins 9 and 10, P1#1 Baud Rate Selection Jumper ON=9600 Baud, OFF=1200
Baud
J2
Front Panel
Microphone jack
10 kΩ input impedance,
50 mV
P-P
nominal input level.
JP1
microSD holder on PCB
JP2
Special option jumper that requires special firmware
JP3
Connector pins for one-way radio receiver
JP4
Options Connector for SINAD
