Configuring the ILS System
90
SmartSiren Platinum Series
NO
TE
Verify features before configuring the lightbar
Federal Signal ILS lightbars may not have all the features available in the lightbar pane.
To make the software configuration of the control pad quick and accurate, determine
what hardware features and DIP switch settings are in the lightbar before you begin.
Refer to “Setting Configuration Options” for the Rear ILS lightbar in Doc. No. 2562422
and “Setting Configuration Options” for the Front ILS lightbar in Doc. No. 2562423.
Configuring the ILS System
There are no default settings for the
ILS System
.
To assign an
ILS System
function to a button:
1.
Click a button in the
Button Configuration Module
.
NO
TE
Button Function Limits
The functions for all buttons (except
Slide Switch 3
, which accepts a limit of 20)
are limited to a maximum of 10.
2.
Select how you want the button to operate by clicking an option button in the
Button Control
pane. If you want the button to act as a timer, select the duration from the drop-down list.
Buttons 1–13
have the additional
Button Control
option to be
Exclusive
. They turn on a
function when pressed and turn off the button that was pressed previously in the same row.
