Configuring the Siren
60
SmartSiren Platinum Series
Siren Default Settings
Before you begin, you may want to review these siren default settings. For an keypad view of the default
settings, see the table in the appendix on page 115.
Button
Siren Function
Button Control
Activated Button
Button 6
Siren: Standby
Exclusive
Button 7
Siren: Radio
Exclusive
Button 9
Siren: Wail
Exclusive
Button 10
Siren: Yelp
Exclusive
Button 11
Siren: Priority
Exclusive
Button 12
Siren: Manual
Momentary
Button 13
Siren: Air Horn
Momentary
Slide Switch 1
Horn Ring Transfer
Momentary*
Button 1
Slide Switch 2
Horn Ring Transfer
Momentary*
Slide Switch 3
Siren Dependent Enabled
Horn Ring Transfer
Momentary*
Inputs 1 through 4
Momentary
* The Button Control Module is not available because the option cannot be changed
Assigning Siren Functions to Buttons 1–15
The
Siren
Pane for
Buttons 1–15
and the
Horn Ring
button has a variety of siren functions, including
eight siren tones, an electronic air horn, radio rebroadcast, and public address. Two functions for
activating siren tones are also available.
NOTE:
The
Standby
siren function, which turns off all siren tones, except
Air Horn
and
Manual
, is
available with
Buttons 1
and
6
.
To assign a siren function to a button:
1.
Click the
a button in the range of
1
through
15
.
2.
Select how you want the button to operate by clicking an option
button in the
Button Control
pane. If you want the button to act as
a timer, select the duration from the drop-down list. Some buttons
have the
Button Control
option to be
Exclusive
. They turn on a
function when pressed and turn off the button that was pressed
previously in the same row.
