Completing the Control Pad Configuration
101
SmartSiren Platinum Series
Uploading the Configuration File to the Control Pad
Uploading the configuration file stores the file in the flash memory of the control pad.
To upload a configuration file:
1.
In the
System
menu select
Program Control Head
.
2.
Wait until the progress bar fills from left to right. When the upload is complete, the file is stored in
the flash memory of the control pad.
Putting the Control Pad into Operation Mode
For the SmartSiren Platinum system to follow the instructions in the configuration file, the control pad
must be put into Operation Mode.
1.
Press
Button 13
. The first LED blinks and the control pad beeps to indicate you are in
Programming Mode.
13
2.
Remove 12 Vdc power from the control pad, then reapply it. The control pad is in Operation Mode
and ready to control the SmartSiren Platinum system.
