manualshive.com logo in svg

Federal Signal Corporation Informer15 I-IP15, Setup, Configuration, And Operation Manual

Share
Download
Federal Signal Corporation Informer15 I-IP15 Setup, Configuration, And Operation Manual Download Page 15

15

1. Configuring the Network Interface

Setup, Configuration, and Operation Manual

 

Federal Signal

 www.fedsig.com

Restoring Configuration to Factory Defaults

You can restore the factory default settings with or without restoring the network 

parameters.

Default Settings

RTU Number: 1

Description: my description

SmartMsg disabled

Modbus disabled

Smartmsg Server: 10.10.10.10

IP Address: 10.10.10.1

Subnet Mask: 255.255.0.0

Default Gateway: 10.10.10.10

Primary/Secondary DNS: 0.0.0.0/0.0.0.0

Admin user name: admin

Admin user password: fedsig

User 1 - User 4 username/password: blank

Factory Support User: Enabled

To restore configuration to factory defaults, do the following:

1. 

Select Factory Defaults. 

The Factory Defaults page appears.

Fields

Description

Include 

Network 

Parameters

Check to include network parameters. NOTE: This changes the IP 

address of the RTU to factory default settings and makes the device 

inaccessible over a production network.

Apply

Restores your settings to the factory defaults. NOTE: Your current 

settings will be overwritten.

2. 

Click Apply restore your settings to the factory defaults.

3. 

Reboot the device for the changes to take effect.

Summary of Contents for Informer15 I-IP15





















Reviews:

No comments

Brands by name

Popular brands

Load more brands