8
General Description
Informer-PA for Public Address Interface (Model I-IP2 Series C)
Federal Signal www.fedsig.com
• LED status indicators for Power.
• Ability to activate onboard relays to control external devices.
• Informers are addressable Individually, in Groups, or All.
• Requires minimal network bandwidth and uses TCP/IP protocol for security and
reliability.
• Remote supervision of Communications, Audio Output, Alert Function Execution.
• Supports fixed IP, DHCP, and Auto-IP.
• Wired Ethernet.
• Works with redundant SmartMsg and Commander® network servers for reliable fail-
safe operation with full two-way control, status monitoring, and configuration of the
Informer-PA.
Ordering Information
Table 1 Ordering Information
Part Numbers Description
I-IP2
Dual Rack/ Wall/Desk Mount Informer PA
I-IP-IO
Informer-IP Desk Mount
I-IPW
Informer-IP Wall Mount
I-IP100DC
Informer100 24 Vdc 100-watt speaker
I-IP100AC
Informer100 120/240 Vac 100-watt speaker
Federal Signal Commander application software provides advanced configuration,
control, and status monitoring for the Informer-IP.
There is a programming fee associated with Informer-IPs programmed at the factory.
Contact your local representative for a quotation.
You can order the following accessories separately.
Table 2 Optional Accessories
Part Numbers
Description
I-SMD2-36
Scrolling Message Display (2 x 36 inches)
X-SPA2120
Rack Mount Amplifier (2 channel 120-watt/channel)
AMR6-2570K
Ceiling Speaker, 6-inch round, 25/70 V, includes tile bridge and back box
AM300
Wall Speaker, 30 watts, swivel mount
RA-700
Rack Mount Amplifier (2 channel 350 watt/channel)
