Federal Signal Corporation AMR6-100K, Installation And Maintenance Instructions Manual

Page: 5 / 40

1
Models AMR6-2570K and AMR6-100K
Safety Message to Installers, Users, and
Maintenance Personnel
It is important to follow all instructions shipped with this product.
This device is to be installed by a trained electrician who is thor-
oughly familiar with the National Electrical Code and will follow
NEC Guidelines as well as local codes.
The selection of the mounting location for the device, its controls
and the routing of the wiring is to be accomplished under the
direction of the facilities engineer and the safety engineer. In addi-
tion, listed below are some other important safety instructions and
precautions you should follow:
• This is not a Listed safety device and is not intended to be used
as such.
• Read and understand all instructions before installing or operat-
ing this equipment.
• Do not connect the speaker to the system while the power is
on.
• All effective warning speakers produce loud sounds, which may
cause in certain situations, permanent hearing loss. You should
take appropriate precautions such as wearing hearing protection.
• All effective warning speakers produce loud sounds, which may
cause, in certain situations, permanent hearing loss. The device
should be installed far enough away from potential listeners to
limit their exposure while still maintaining its effectiveness. The
OSHA Code of Federal Regulations 1910.95 Noise Standard
provides guidelines which may be used regarding permissible
noise exposure levels.
• After installation, test the sound system to ensure proper operation.
• After testing is complete, provide a copy of this instruction sheet
to all operating personnel.
• Establish a procedure to routinely check the speaker installa-
tion for integrity and proper operation. Any maintenance must
be performed by a trained electrician in accordance with NEC