Installation: Flat Surface (External Conduit) Mount
Model 400 Series Lights
9
5. Start the 10-32 x 3/4" cone-point set screws in the threaded
holes in the upper and lower edges of the wall/ceiling
mounting bracket.
6.
Attach the cover plate to the adapter plate using the two
6-32 x 3/16" self-tapping screws.
7. See Figure 3. Attach the adapter plate to the mounting
surface using the appropriate installer-supplied hardware.
Figure 3
Adapter plate attached
DIMPLES
TOP & BOTTOM
ADAPTER PLATE (1)
1/4-20 SCREWS HEX HD. (2)
10-32 SET SCREWS ALLEN HD. (2)
MOUNTING BRACKET (1)
(WALL/CEILING MTG.)
GROMMET
LEXAN DOME
WIRE NUTS (2)
MOUNTING SCREWS (2)
4" X 4" ELECTRICAL BOX (1)
CUSTOMER SUPPLIED
MAIN MOUNTING FRAME
HOUSING
290B1505B
8.
Place the light/mounting bracket assembly over the adapter
plate and tighten the two cone point set screws. Ensure that
the screws engage the two dimples in the adapter plate.
