Federal Signal Corporation 400 Series Installation Instructions Manual Download Page 14

Page: 14 / 16

Model 400 Series Lights

Obtaining Service, Assistance, and Parts

Products returned for repair require a Return Authorization form.
To obtain service for the product, please contact the Federal Signal

Service Department at 708-534-4858.

For technical assistance, please call Federal Signal Technical

Support at 708-534-3424, extension 5823.

To order replacement parts, please call Federal Signal

Customer

Support at 708-534-4756.

Table 2

Replacement parts

Description

Part Number

Dome, Lexan, Red

K8547C001-01

Dome, Lexan, Blue

K8547C001-02

Dome, Lexan, Green

K8547C001-03

Dome, Lexan, Amber

K8547C001-04

Dome, Lexan, Clear

K8547C001-05

Lamp (400R)

K8107181

Interior Fresnel Lens, Clear (400ST) K8248C004-04
Tube, Strobe (400ST)

K8107178

PC Board Assembly (400ST)

K200D825

For instructions on how to service the Model 400ST Strobe Light,
see document no. 256A470 available at:

http://www.federalsignal-indust.com

Summary of Contents for 400 Series

















Search results

Summary of Contents for 400 Series

Reviews:

Related manuals for 400 Series

Brands by name

Popular brands

Federal Signal Corporation 400 Series, Installation Instructions Manual

Search results

Summary of Contents for 400 Series

Reviews:

Related manuals for 400 Series

Brands by name

Popular brands