WINP – Wireless Input
User manual
December 2021 - Version EN 1.3
www.fdstiming.com
7.
USB
The Mini-USB connector has various functions including:
External power supply and battery charging
Configure the WINP photocell options /parameters
Update the Firmware
Hardware reset in the unlikely event of a frozen WINP
(using the app “WIRC/WINP Setup & Reset”)
8.
How to update the WINP firmware
Updating the firmware is relatively simple. The software “FdsFirmwareUpdate” is required
a)
Install the program “FdsFirmwareUpdate” on your computer
b)
Connect the USB cable to your PC and WINP
c)
Run the program “FdsFirmwareUpdate”
d)
Select the COM Port
e)
Select the update file (.bin)
f)
Press Start on the program (do not unplug the device during update)
g)
The WINP transmitter will be updated
h)
Once the update is complete, remove USB cable and switch ON the WINP transmitter
9.
Technical specifications
Frequencies & Power :
Europe
India
Russia
North America
Japan (TBox-41 only)
869.4 - 869.65 MHz
100mW
865 - 867 MHz
100mW
868.7 - 869.2 MHZ
100mW
920 - 924 MHz
100mW
922 - 927 MHz
20mW
Radio impulse precision
1/10’000 sec
Min locking time
(between two detections)
200ms for Groups A-D
500ms for Groups E-H
Operating temperature:
-20°C to 60°C
Battery charge possible only between 0°C and 45°C
External power input
USB compatible (5V +/- 5%) up to 1A
Battery
LiPo 1700mAh
Autonomy @20°C
150 hours radio ON
Dimension
93x58x27mm
Weight
200gr