FDS FD320CV Installation And Operation Manual Download Page 19

 

Document Number: 

MAN – FD320CV-X

 

Rev: 

Revision Date: 

09/23/2019 

Page 19 of 20 

 

 

©

 

2019 FDS Avionics Corp.  

All Rights Reserved. 

TECHNICAL SUPPORT 

470-239-7421 or FDSAvionics.com

 

 

 

 

Limited Warranty  

All FDS Avionics Corp. products are warranted to be free from material or manufacturing defects for a period of 24 

months from the date of shipment for General Aviation customers or 12 months from the time of shipment for 

Government/Special Mission customers. Any material or repair workmanship for in-warranty repair service will be 

specifically warranted for 90 days or the remainder of the original warranty period, whichever is longer. If the original 

warranty period has expired, the 90-day repair warranty is limited to the material and workmanship specific to the repair 

activity completed. 

The following conditions are exclusions to warranty coverage. 

1.   Labor costs associated with installation, removal or reinstallation of any product. 

2.   Damage to or malfunction caused by any unauthorized alteration made to the product. 

3.   Resolving signal quality issues caused by externally generated noise introduced by aircraft electrical 

systems or other components connected to any FDS product. 

4.   Any malfunction caused by improper installation or connection to aircraft wiring, industry standard cabin 

management/inflight entertainment systems, or third party commercial equipment not specifically identified 

as compatible with FDS products. 

5.   Any malfunction caused by installation that does not conform to precautions associated with operating 

environments listed in the operating manual or consistent with industry best practices such as high 

temperature, adequate ventilation, high humidity, high dust, or power surges. 

6.   Cosmetic damage or damage to internal components caused by installation or removal, failure to follow 

installation or operating instructions, or any neglect or misuse of the product. 

7.   Any product that is returned for service with a broken tamper evident seal, indicating tampering or 

improper handling of the product by an unauthorized person. Violation of product tamper evident seals or 

modification of factory installed serial and PMA labels voids any warranty, either expressed or implied. 

The FDS Technical Support team is available to provide distance troubleshooting support during business hours (8:00 

am to 5:00 pm EST) Monday through Friday at (470) 239-7421. 

Many repair requests can be resolved through distance support and may not require the return of the merchandise to the 

factory. If a product must be returned to the factory for repair, an RMA number will be issued as directed by the Technical 

Support team and communicated by the Repair Coordinator.  

Upon request by the customer, FDS may send a Service Technician onsite to repair any non-PMA products. The travel 

expenses incurred to include transportation, lodging, and meals along with the technician's hourly rate shall be payable 

by the customer in accordance with FDS' applicable rates and procedures. 

FDS Avionics Corp. will, upon receipt of returned merchandise, remanufacture or replace the unit at our discretion and 

return the product by Ground Return Shipping. Express return shipment will be the responsibility of the sender. 

This warranty is not transferable. 

Any implied warranties expire at the expressly limited warranty expiration date. FDS shall not be held liable for any 

indirect, special, punitive, incidental or consequential damages. 

Some states do not allow limitation on the length of an implied warranty. In such states, the exclusions or limitations of 

this limited warranty may not apply. 

 

Summary of Contents for FD320CV





















Reviews: