18
The Front of the Control Box shows standard position for various interfaces.
Additional options are not labelled; refer to the guidance given above.
An example of a
Sentinel 2 is shown
opposite.
The unit includes the
options of
a Flow interface and
2 internal pressure
sensors.
(The unit includes
a 3-pin connector
for Hydroswitch).
2.6
H
YDROSWITCH
-
D
ESCRIPTION
The Hydroswitch,
shown opposite, is a
required part of the
Sentinel 2 system.
It includes a 3-port
latching solenoid
valve attached via a
cable.
The unit attaches to
the control box via a
built-in cable with
MIL-spec connector.
The Hydroswitch is powered by internal batteries. Its operation is directed by the
Sentinel 2 Control Box but takes approximately 10 seconds to change.
