Solar Inverter
1200VA/2400VA
V. 2.1
1. Introduction
Thank you for purchasing the solar inverter. This simple solar inverter is designed to power
your home appliances or precious 3C electronics. It also can handle motor-type loads with high
surge power such as vacuums, small freezers, or drills. With built-in solar charger, it can
convert solar power to battery power and provide continuous power to connected equipment
during night time.
2. Product Overview
1.
Power Switch
2.
Status indicators
3.
LCD display
Please see the Operation section for the details of LED and LCD display.
4.
Output receptacles
5.
Charge current selector: 10 A or 20 A
6.
AC input
7.
Circuit breaker
8.
External battery connectors
9.
Solar panel terminal
10.
Solar charging indicator
11.
Charger fault indicator
3. Important Safety Warning (SAVE THESE INSTRUCTIONS)
Before using the inverter, please read all instructions and cautionary markings
on the unit, this manual and the batteries.
General Precaution-
Install the UPS in a protected area that is free of excessive dust and has adequate air flow.
Please place the UPS away from other units at least 20 cm to avoid interference. Do NOT
operate the UPS where the temperature and humidity is outside the specific limits. (Please
check the specs for the limitations.)
Quick Guide
Conventions used:
WARNING!
Warnings identify conditions or practices that could result in personal injury;
CAUTION!
Caution identify conditions or practices that could result in damaged to the
unit or other equipment connected.
FCS - LOBO SOLAR INVERTER