background image

 

                                                       

FCAR Series Product

 

Operation Manual Instruction

 

 

Statement 

 

The manual is designed only for the use of the vehicle tire pressure monitoring system 

(TPMS),  without  the  written  approval  of  FCAR,  any  corporation  or  individual  cannot 

copy and backup in any form (electronic, mechanical, photocopying, recording or other 

means).   

 

This  manual  is  only  used  for  professional  automobile  maintenance  technicians.  This 

manual  offers  the  product  operating  methods  only.  The  company  accepts  no 

responsibility for any possible consequence of the use of this manual as applied to other 

equipment.   

 

The company will not take any responsibility for the user or third parties for equipment 

damages,  losses,  costs,  or  expenses  resulted  in  accidents,  abuse  or  misuse  of  this 

product,  or  unauthorized  modifications,  repairs  or  alterations  to  this  product  or 

operation or maintenance to not comply with the instructions. This manual is based on 

the  latest  configurations  and  functions  of  product

  The  new  description,  data  and 

illustration may change compared to those described in this manual. FCAR reserves the 

rights to make changes to its products without prior notice.   

 

FCAR has registered trademark in Mainland China. In the countries and areas where our 

trademark,  service  identification,  domain  name,  icon,  company  name,  etc.  have  not 

been  registered,  FCAR  claims  ownership  for  non-registered  trademark,  service 

identification, domain name, icon and company name. Other products and trademark of 

company name referred in this  manual still belong to the original registered company. 

Without the consent of owner in written form, any individual or third parties cannot use 

our trademark or any other referred trademark of other company, service identification, 

domain name or company name, etc.         

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: 

1.This device may not cause harmful interference. 

2.This  device  must  accept  any  interference  received,  including  interference  that  may 

cause undesired operation 

 

Summary of Contents for IDIAGT138

























Reviews: