FCAR Product Instruction Manual
31
viewed from [Data Review] in the data management function.
How to perform data stream comparison
1)
Click [Selection] function icon "
" in the upper right corner, tick the parameter
items to be compared with data stream in the pop-up window, and select [OK] to
return;
2)
Click [Data Stream Contrast] function icon "
" in any hidden column on the
right side. In the pop-up dialog box, tick the data file that has stored with the
same model and select [OK] to return.
3)
At this time, a bar of "comparison value" is emerged in the data flow interface, as
shown in the figure below, the service technician can quickly find and eliminate
the vehicle fault problem through system parameter comparison.
Note: The function icons such as data stream waveform or line graph and data
stream comparison of some models are displayed at the bottom position of the
data stream interface. Please operate according to the specific vehicle function
display menu.
3.5.4 Actuation Test
By performing this function, you can access the vehicle-specific subsystem and
