FCAR FD505 Wheel Alignment System User Manual
5
c.
After the test is completed, exiting and closing the 5D four-wheel alignment system,
please turn off the power on the socket to avoid damage to the equipment caused by the
power grid spike.
d.
Special care must be taken that the relevant power supply equipment connected to
the machine must comply with your country electrical standards. For example, not
overloaded, the line must be safe, etc. otherwise it will cause damage to the machine, such
as burning, etc. The company will not be responsible for the warranty of such problems.
e.
Do not pull or insert the cables of the machine without turning off the power.
FCAR
5D four-wheel alignment system
1
Product description
FCAR 5D four-wheel alignment system is the product and platform of FCAR
self-developed vehicle four-wheel alignment., combined with the application feedback of
3D aligner users and the lack of 3D products. (Field, precision, transportation, installation,
shunting, etc.) Through more than 5 years of research and development and test
verification, it has launched an era-based, landmark four-wheel aligner product. Since then,
the four-wheel aligner has achieved a leap from the 3D era to the 5D era.
1.1
When do you need to do wheel alignment?
When the following condition occurs, the vehicle needs to do wheel alignment:
A.
In general, it is recommended to do alignment for every 15,000 km or six months of
driving;
B.
In general, for the new car, it is recommended to alignment after driving 3000 km;
C.
The direction is not straight when going straight, the steering wheel is vibrating,
shaking or the steering wheel is too heavy, and it cannot be automatically returned
