Product Manual
16
VEHICLE CONNECTION
CONNECT VCI BOX TO VEHICLE
Before VCI box connected to vehicle, it is necessary to judge whether the
diagnostic socket of the test vehicle is a standard OBD-II port or a non-standard
OBD-II port.
⚫
For Vehicles compatible with the OBD-II management system, The VCI can
be connected to vehicle diagnostics socket and supplied with power only with
the integrated standard OBD-II connector;
⚫
For Vehicles that are not compatible with the OBD-II management system,
you need to select the corresponding connector; some other vehicles need to
supply power to the VCI box through other power sources of the vehicle.
Here we make the operating instruction regards to these two connection modes.
➢
Standard OBD-II port connection
For vehicles with standard OBD-II port, you just need to connect with all-in-one
main test cable OBD connector rather than other connectors, as shown in Figure
3.2-1:
