Product Manual
12
LOGOUT
Click the setting icon
“ “ in the upper right corner toolbar of the screen to enter
[
Setting]
page, and then select the menu [
Log Out
] .
POWER OFF
All vehicle communication must be terminated before shutting down the diagnostic
equipment. Vehicle's electronic control module would go wrong if forced shutdown
during communication, please exit all diagnostic applications before shutting down.
The shutdown steps are as follows:
1)
Short press host power switch (about 2 seconds)
2)
Click [
Power off
] in the pop-up prompt to close host.
INTRODUCTION TO EACH MENU OPTION
After the system is logged on, enter the following main menu:
