Fcar F4SN HD Pad Pro, Manual

Page: 18 / 50

FCAR F4SN Manual
18
Figure 3.2-2 Connection of non-OBD-II interface
Instructions:
1) Determine the location and interface of the diagnostic seat;
2) Connect one end of the main test lead to the DB15 connector of the FV100 and
tighten the fixing bolts;
3) Connect the other end of the main test cable to a dedicated connector corresponding to
the vehicle;
4) Connect the dedicated connector that is connected to the main test cable to the vehicle
diagnostic socket;
5) At this time, the VCI box (FV100) is powered by the vehicle diagnostic seat, and the
power light is on.
3.2.2 Tablet connecting with VCI Box
After the VCI box is connected to the vehicle, the connection between the Tablet and
the VCI box needs to be matched, and the vehicle diagnosis can be performed after the
matching is completed; the VCI box supports two ways of communicating with the tablet
Tablet: Bluetooth pairing and USB cable.
Pairing via Bluetooth ：
1) Turn on the tablet Tablet power;