FCA US RAM 2500 2019, Manual

Page: 21 / 148

1. Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the ON/
RUN position (do not start the engine.)
2. Push and release the down arrow button to scroll
downward through the main menu to “Vehicle Info”.
3. Push and release the right arrow button to access the
”Fuel Filter Life” screen.
4. Push and release the right arrow button to access the
“Reset” screen.
5. Push and release the right arrow button to select the
reset of the Fuel Filter Life.
6. Push and release the up arrow button to exit the
instrument cluster display screen.
NOTE:
If the indicator message illuminates when you start
the vehicle, the Fuel Filter indicator system did not reset. If
necessary, repeat this procedure.
Diesel Particulate Filter (DPF) Messages
The Cummins diesel engine meets all diesel emissions
standards, resulting in one of the lowest emitting diesel
engines ever produced. To achieve these emissions stan-
dards, your vehicle is equipped with a state-of-the-art
engine and exhaust system. These systems are seamlessly
integrated into your vehicle and managed by the Pow-
ertrain Control Module (PCM). The PCM manages engine
combustion to allow the exhaust system’s catalyst to trap
and burn Particulate Matter (PM) pollutants, with no input
or interaction on your part.
WARNING!
A hot exhaust system can start a fire if you park over
materials that can burn. Such materials might be grass
or leaves coming into contact with your exhaust sys-
tem. Do not park or operate your vehicle in areas where
your exhaust system can contact anything that can
burn.
Your vehicle has the ability to alert you to additional
maintenance required on your vehicle or engine. The
following messages may display in your instrument cluster
display:
•
Perform Service — Your vehicle will require emissions
maintenance at a set interval. To help remind you when
this maintenance is due, the instrument cluster display
will display “Perform Service”. When the “Perform
Service” message is displayed in the instrument cluster
display it is necessary to have the emissions mainte-
nance performed. Emissions maintenance may include
3
GETTING TO KNOW YOUR INSTRUMENT PANEL 19