FCA US RAM 1500 2017 Page 353 Owner'S Manual Download

Page: 353 / 710

Voice Text Reply

Uconnect will announce

incoming

text messages. Push the

Phone button

and say

Listen.

(Must have compatible

mobile phone paired to Uconnect system.)

1. Once an incoming text message is read to you, push the

Phone button

. After the beep, say:

“Reply.”

2. Listen to the Uconnect prompts. After the beep, repeat

one of the pre-defined messages and follow the system
prompts.

PRE-DEFINED VOICE TEXT REPLY RESPONSES

Yes.

Stuck in traffic.

See you later.

No.

Start without

me.

I’ll be late.

Okay.

Where are you?

I will be

minutes late.

Call me.

Are you there

yet?

I’ll call you later.

I need

directions.

See you in

<number> of

minutes.

I’m on my way.

Can’t talk right

now.

I’m lost.

Thanks.

TIP:

Your mobile phone must have the full implementation

of the

Message Access Profile (MAP)

to take advantage of

this

feature.

For

details

about

MAP,

visit

UconnectPhone.com.

Uconnect 8.4/8.4 NAV Phone

UNDERSTANDING YOUR INSTRUMENT PANEL

351

Summary of Contents for RAM 1500 2017







































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAM 1500 2017

Reviews:

Related manuals for RAM 1500 2017

Brands by name

Popular brands

FCA US RAM 1500 2017, Owner'S Manual

Search results

Summary of Contents for RAM 1500 2017

Reviews:

Related manuals for RAM 1500 2017

Brands by name

Popular brands